HKM-006163 Smart Cordless Electric Kettle with 1900 Watts Fast Boiling, 1.7 Liter Capacity, Auto Shut-Off, WiFi and Temperature Control

HKM-006163 · Electric Kettles · 1.7 L, 1900 W, Wi-Fi, Blue or Red

Body Display, Wi-Fi, Two Keys

HKM-006163 is a 1.7 L kettle with its controls printed on the body rather than gathered on a base: a three-digit temperature readout, a Wi-Fi mark, a keep-warm line, and two round keys below them, labelled in Vietnamese for mode and for power. The shell is a tapered cylinder in a deep metallic blue or a bright red, with a black handle, lid and base.

It suits a kitchen where the kettle is asked to hold a temperature rather than only to boil: the readout stays on the body, the keep-warm function is a line of print rather than a hidden setting, and the Wi-Fi mark points to control from a phone. At 1900 W and 1.7 L it is sized for a round of tea for four or a pan of water for cooking.

At a Glance

• Type — cordless kettle with body-mounted display and Wi-Fi
• Capacity — 1.7 L, as stated in the listing
• Power — 1900 W
• Display — three-digit readout on the front of the body
• Functions — keep warm, mode key, power key, Wi-Fi
• Safety — automatic shut-off, per the listing

Materials and Construction

The body is steel, pressed into a cylinder that flares slightly at the shoulder and closes at a black base ring. The finish in the blue version is a deep metallic coat with a visible grain of reflection down its length; the red is a brighter, glossier coat of the same construction. The interior is not photographed, and the listing does not name the liner material, so the contact surface is recorded as unstated.

The handle is a black loop set high on the shoulder, with a squared opening and a thumb rest at the top. The lid is a flat black disc that sits inside the rim, and the spout is a short lip cut into the collar rather than a tube. The base is a black ring that lifts the body clear of the counter.

• The front print carries the brand, then the digits, then the Wi-Fi mark and the keep-warm line, then the two keys.
• The keys are round membrane contacts: the upper one is labelled for mode, the lower for power, both in Vietnamese.
• The base is a plain plate with no controls, so the settings live on the body and travel with it.

How It Works

Fill, seat the body on the base, and start it with the power key. The display shows the water temperature in three digits; the keep-warm line beneath it names the function, and the Wi-Fi mark indicates that the kettle can be reached over a network, which the listing's own title states as Wi-Fi control. No app is described, no temperature range is published and no hold time is given, so none is claimed here beyond the functions printed on the shell.

The mode key is the second control: in the Vietnamese labelling on the body it reads for mode, and the listing pairs temperature control with the Wi-Fi function. Automatic shut-off is named in the listing's title, which is the only safety feature described.

Because the panel is on the body rather than the base, the reading is visible while the kettle is carried to the sink or the table — and because the body lifts off the plate, it can be filled at the tap and set back at any rotation without a plug to re-seat.

Placement and Use

The kettle wants a level counter near an outlet, with the printed face turned toward the room so the digits can be read from a step back. Leave headroom for lifting the lid and clearance at the spout for a cup held at an angle, and keep the base ring dry — the coupling sits under the body.

• Fill below the collar so the lid seats on the rim rather than on water.
• Keep the printed face dry; the keys are membrane contacts under the coating.
• Wipe the base ring before setting the body back, so water does not run into the contacts.

Included and Optional

Colours and Finishes

Two finishes are sold at the same price: the deep blue that the listing treats as its default, and red. Both are metallic coats over steel with the same black handle, lid and base, and both are photographed on a plain ground so the colour is established rather than implied.

The print on the front is white on the blue and white on the red, and the digits read the same way in both. No coating or plating is named in the listing for the liner or the exterior, so the treatment behind each colour is recorded as unstated.

Care and Maintenance

Descale every four to six weeks where the water is hard: equal parts white vinegar and water, stood twenty minutes, then a fresh boil and two rinses. The body takes a soft brush; abrasives dull both the interior and the printed face.

Wipe the outside with a damp cloth and dry it, since the metallic finishes mark with water spots. The printed panel should be wiped rather than scrubbed, and the base ring kept dry. Neither body nor base is meant to be immersed.

Specifications

Frequently Asked Questions

Shipping, Returns and Warranty

Every HKM-006163 is backed by coverage designed to protect your investment.

HKM-006163 · 1.7 L 1900 W kettle · body display with Wi-Fi mark · keep warm · blue or red