Hot Products >>
HKM-0887507 2.5 Inch USB 3.0 Hard Drive Enclosure for SATA SSD and HDD with UASP and Tool-Less Fitting Support to 2TB
HKM-0887507
USB 3.0, Tool-Free Case
The HKM-0887507 is a case for a 2.5 inch drive, moulded in black ABS with a flat top and a single USB 3.0 socket at one end. The tray inside takes an SSD or a mechanical drive between 7 and 9.5 millimetres thick, and the drive slides in without a screwdriver. The case measures about 4.9 by 3.1 by 0.5 inches, and the USB 3.0 link carries data at up to 5 gigabits a second. An SSD is accelerated by UASP where the computer supports it.
Key Features
Six details that shape how the HKM-0887507 is built and how it works.
A USB 3.0 Link
The case connects over USB 3.0, which carries data at up to 5 gigabits a second rather than the slower rate of an older link. That is the part that decides how quickly a large file moves across.
Takes an SSD or a Mechanical Drive
The tray accepts a 2.5 inch SATA drive of either kind, so an old mechanical drive and a newer SSD both fit the same case. The drive simply slides in and sits on the connector at the back.
Room for Drives 7 to 9.5 mm Thick
The tray is sized for drives between 7 and 9.5 millimetres thick, which covers the slim SSDs and the taller mechanical drives. Nothing has to be packed out to make a thinner drive sit square.
Up to 2TB of Capacity
The case takes a drive of up to 2TB, which is more than a 2.5 inch mechanical drive is usually made in. The case itself adds no capacity, since it holds the drive that is fitted to it.
UASP for an SSD
An SSD is read with UASP where the computer supports it, which lifts the speed by roughly a tenth to a fifth over the standard link. That is the setting that makes an SSD in a case feel closer to one fitted inside.
Fitted Without Tools
The drive goes into the tray without a screwdriver, and the shell closes over it. The case is moulded in ABS and measures about 4.9 by 3.1 by 0.5 inches, so it travels in a pocket as easily as a phone.
Overview
A slim black case that turns a 2.5 inch drive into a portable disk.
The HKM-0887507 is a case for a 2.5 inch SATA drive, moulded in black ABS with a flat top and a single USB 3.0 socket at the end. The tray inside accepts an SSD or a mechanical drive between 7 and 9.5 millimetres thick, up to 2TB, and the drive slides in without a screwdriver. The USB 3.0 link carries data at up to 5 gigabits a second, and it is backward compatible with SATA 2.0 as well as SATA 3.0. Where the computer supports it, UASP lifts the speed of an SSD by roughly a tenth to a fifth. The case measures about 4.9 by 3.1 by 0.5 inches, supports hot plugging, and is ready to use without a driver.
A Drive in a Pocket Case
A 2.5 inch drive fitted without tools and linked by USB 3.0.
The tray takes a 2.5 inch SATA drive between 7 and 9.5 millimetres thick with no screwdriver, and the USB 3.0 link moves data at up to 5 gigabits a second. UASP lifts an SSD further where the computer supports it.
Full Specifications
What the shell, the tray and the link are made of.
Fitting And Connecting
How the tray, the link and the drive work together.
The HKM-0887507 is a case that turns a bare 2.5 inch drive into a portable disk. The tray opens without a screwdriver, and the drive slides in between 7 and 9.5 millimetres thick and seats on the connector at the back of the case, so an SSD and a mechanical drive both fit. The shell closes over the drive, and the link runs over USB 3.0 at up to 5 gigabits a second, backward compatible with SATA 2.0 as well as SATA 3.0. Where the computer supports it, UASP lifts the transfer rate of an SSD by roughly a tenth to a fifth.
What’s in the Box
What arrives with the drive enclosure.
1 x Drive Enclosure
The black ABS case with the tray inside
1 x USB Cable
The lead that links the case to the computer
1 x Tray Cover
The panel that closes over the fitted drive
1 x Fitting Guide
Drive fitting and connection guidance
1 x Pouch
The pouch for carrying the case and the cable
1 x Warranty Card
Coverage details for the HKM-0887507
Why Choose the HKM-0887507
Six further reasons the HKM-0887507 stays in a bag.
A Drive Already Owned Becomes Portable
A 2.5 inch drive taken out of a laptop can go straight into the case and be used as a portable disk. That is what makes an old drive useful again rather than a spare part in a drawer.
Both Drive Types Fit
The tray takes an SSD and a mechanical drive, so the same case suits a fast drive and a larger one rather than one type only. The thickness range covers the slim and the taller drives alike.
USB 3.0 at 5 Gbps
The link carries up to 5 gigabits a second, which is what makes moving a large folder practical rather than an overnight job. The case is backward compatible with SATA 2.0 as well, so an older drive still works.
UASP Lifts an SSD
Where the computer supports it, UASP raises the speed of an SSD by roughly a tenth to a fifth over the standard link. That is the closest a drive in a case comes to a drive fitted inside.
No Tools to Fit It
The drive goes into the tray without a screwdriver, and the shell closes over it. That means a drive can be swapped between cases without hunting for a screw kit.
Small Enough to Carry
At about 4.9 by 3.1 by 0.5 inches the case travels in a pocket beside a phone, and it works without a driver or a power supply of its own. Hot plugging means it can be connected and removed without shutting the computer down.
Frequently Asked Questions
Quick answers about the HKM-0887507 enclosure.
Which drives fit?
The tray takes a 2.5 inch SATA drive, either an SSD or a mechanical drive, between 7 and 9.5 millimetres thick and up to 2TB. That covers the drives used in laptops and the portable drives sold on their own. A 3.5 inch drive is too large for this case, and a drive with an older IDE connector will not fit at all. A 3.5 inch drive is too large for this case.
Does it need a driver?
No. The case is plug and play, so a computer recognises it as an external disk when the cable is connected. Where the computer supports UASP, an SSD is read faster, but the case works without that as well. Connect the case before copying a large amount across, so the drive can be seen as soon as the transfer starts. Connect the case before copying a large amount across.
How fast does it transfer?
The USB 3.0 link carries data at up to 5 gigabits a second, which is the rate the connection allows rather than a promise about a particular drive. A mechanical drive will be limited by its own speed, and an SSD with UASP support will be faster again. Try one large file first, so the rate is known before a long transfer begins. Try one large file first to learn the rate.
How do I fit the drive?
Slide the drive onto the connector in the tray until it seats fully, then close the shell over it. Nothing has to be screwed down, so the whole job takes a moment. Check the drive sits square rather than at an angle, and never force the shell closed, because the connector at the back is the part that takes the strain. Check the drive sits square rather than at an angle.
Does it need its own power?
No. The case takes its power down the USB cable, so nothing has to be plugged into a socket at the wall. That is what makes it practical to use with a laptop away from a desk. Avoid using an unpowered hub in the chain, because a hub that cannot supply the current will cause the drive to drop out during a copy. A hub that cannot supply the current causes dropouts.
Is it safe to unplug in use?
The case supports hot plugging, but a drive should still be ejected properly before the cable is removed, because a copy in progress will be cut short otherwise. Use the eject option on the computer and wait for the light to settle before pulling the plug. A drive that drops out mid-copy can lose the file being written. A drive that drops out mid-copy can lose the file.
Quick Troubleshooting
Common HKM-0887507 points and what to check first.
The drive is not recognised
Check that the drive is seated fully on the connector inside the case, because a drive sitting at an angle will not make contact. Try another USB port on the computer rather than a hub, and try the cable on another device to rule out the lead. A drive that was taken straight from a laptop may also need to be checked as a bare drive before the case is blamed. Try the cable on another device to rule out the lead. A drive sitting at an angle inside the case will not make contact.
The transfer is slow
A slow transfer is usually the drive rather than the case, because a mechanical drive has its own speed limit. Check that the cable is a USB 3.0 lead rather than an older one, since a slower cable pulls the whole link down. Connect the case directly to the computer rather than through a hub. A slower cable pulls the whole link down with it. A USB 3.0 lead is needed to reach the full link speed.
The case gets warm
A little warmth during a long transfer is normal, because the drive inside is working. Give the case air rather than covering it with a cloth, and let it cool between large transfers. A case that becomes hot rather than warm should be left to cool before the next copy. Give the case air rather than covering it with a cloth. Let the case cool between large transfers rather than stacking them.
The drive drops out mid-copy
Check the cable connection at both ends and connect the case directly to the computer, because an unpowered hub is the usual cause of a drive that disappears part way through. Eject the drive before removing the cable, and check the drive for errors before starting the copy again. An unpowered hub is the usual cause of a dropout. Eject the drive before the cable is removed, every time.
It will not close after fitting
A case that will not close has the drive sitting at an angle rather than flat, so open it and reseat the drive on the connector. Check that no part of the drive is caught on the edge of the shell. Never force the case shut, since the connector at the back takes the strain rather than the shell. The connector at the back takes the strain, not the shell. Open the case and reseat the drive if it will not close.
The speed is below 5 Gbps
The 5 gigabits a second is the rate the link allows rather than what a drive will reach, so a mechanical drive will always read lower. Check that the cable is a USB 3.0 lead, and that the port on the computer is a USB 3.0 port, because either one being older will cap the link. Connect the case directly rather than through a hub. Connect the case directly rather than through a hub. Check that the port on the computer is a USB 3.0 port.
Service & Policies
Coverage that keeps working long after the box arrives.
Free Shipping on All Orders
Every order ships free. Handling time: 0-1 business days (Monday to Friday). Transit time: 2-5 business days (Monday to Friday). A tracking number is emailed as soon as the parcel leaves our warehouse.
180 Days Purchase Protection
Your purchase is protected for 180 days from the delivery date against manufacturing defects and damage in transit. If something arrives wrong, we make it right.
30 Days Money Back Guarantee
Not completely satisfied? Request a return within 30 days of delivery for a full refund. We keep the process simple and hassle-free.
24 Months Warranty Service
The product is covered by a 24-month warranty from the delivery date against manufacturing defects. Coverage includes parts and labor; normal-wear items are excluded.
Important Safety Notes
Read these notes before the first use of the HKM-0887507.
The HKM-0887507 holds a bare drive, so fit the drive with the case unplugged from the computer and check that it seats fully before the shell is closed. Never force the shell shut, because the connector at the back of the tray takes the strain. Eject the drive properly before the cable is removed, and avoid an unpowered hub in the chain, since a drive that drops out mid-copy can lose the file being written. Keep the case away from water and from strong magnets, and do not cover it during a long transfer. A drive that has been taken out of a laptop should be checked before it is relied on.
HKM-0887507 - 2.5 inch SATA drive enclosure in a black ABS shell, about 4.9 by 3.1 by 0.5 inches, with a USB 3.0 interface at up to 5 Gbps, support for SSD and mechanical drives between 7 and 9.5 mm thick and up to 2TB, SATA 3.0 with backward compatibility to 2.0, UASP acceleration for SSDs and a tool-free tray. Read the manual before first use. Nothing here is safety certification advice.
Every product we offer includes a 180-day purchase protection plan at no additional cost. This coverage extends beyond a standard warranty, reflecting our confidence in product quality and our ongoing commitment to your satisfaction.
The protection plan is designed to provide practical help in real-world situations. Whether you encounter a manufacturing issue, a performance problem, or an unexpected accident, our team is ready to assist with clear, fair solutions.
What Is Covered
Manufacturing Defects
We replace items with material or workmanship flaws at no charge.
Performance Failures
Free repair or replacement if the product fails under normal use.
Accidental Damage
One-time courtesy replacement at a reduced price.
Zero Hidden Fees
All shipping costs for replacements and returns are covered.
How to File a Claim
How This Differs from the Warranty
The 180-day purchase protection includes accidental damage and performance failures that are typically not covered by a standard warranty. It provides an additional layer of support during the first six months after purchase, giving you greater confidence and peace of mind.
We want you to be completely satisfied with your purchase. If for any reason you are not fully happy, you may return your item within 30 days of delivery for a full refund. No lengthy forms, no unnecessary questions.
Our return policy is built on a simple principle: if the product is not right for you, we will make it right. We understand that online shopping involves trust, and we work hard to earn that trust with every order.
Return Eligibility
30-Day Window
Request a return within 30 days of delivery.
Original Condition
Unworn or unused, with tags and original packaging.
Proof of Purchase
A receipt or order number is required.
Fast Refund
Refund processed within 10 business days.
How to Start a Return
Returns & Exchanges Overview
Damages & Exchanges
Please inspect your order as soon as it arrives. If the item is defective, damaged, or incorrect, contact us immediately so we can evaluate the issue and make it right. For exchanges, the fastest option is to return the original item and place a new order for the replacement.
We believe in the quality of our products, and we want you to share that confidence. Every product is backed by a 24-month warranty covering all structural and functional components, including zippers, buckles, straps, and fabric integrity.
The warranty is designed to be simple and accessible. You only need your proof of purchase to begin a claim, and our team will assess the issue promptly. If a manufacturing issue arises, we will make it right.
What the Warranty Covers
Comprehensive Coverage
Every part warranted for two full years.
Free Repair or Replacement
Whichever is faster, at no cost to you.
Quick Turnaround
Claims assessed within 1 business day.
Transferable
Warranty follows the product, not the owner.
How to File a Warranty Claim
Every order ships free—no minimums, no hidden fees. We currently deliver across the United States and are actively working to expand to more countries. We partner with reliable U.S. courier services to ensure your order arrives safely and on time.
Our delivery process is designed for transparency. From the moment you place your order to the moment it reaches your door, you receive clear updates at every stage. We carefully inspect each product before dispatch, and we provide tracking information as soon as your order ships.
Our U.S. Shipping Partners
USPS
Official national carrier with nationwide coverage.
UPS
Fast and reliable ground and express shipping.
FedEx
Express delivery with real-time tracking.
DHL eCommerce
Efficient parcel delivery for e-commerce shipments.
Delivery Process
Delivery Time Summary
Cancellations & Taxes
You may cancel your order at any time before it ships. All product prices include applicable taxes, and there are no additional VAT or customs fees for orders delivered within the United States.
Whether you have a question, need help with an order, or just want some advice, our support team is available around the clock. We don't just respond to messages—we work with you to find real solutions that fit your needs.
Our support specialists are trained to handle a wide range of requests, from product recommendations to technical troubleshooting. No matter the question, you can expect a professional and friendly response.
How We Can Help
Product Guidance
Our experts help you choose the right product.
Order Assistance
Modify orders, track shipments, or speed up delivery.
Warranty & Returns
Start claims or returns quickly and easily.
Technical Troubleshooting
Step-by-step solutions for product issues.
Contact Information
24/7 Phone
+1 (209) 280-3200
support@hekomart.com
Address
3401 Dale Rd, Modesto, CA 95356
Support Hours
Available 24 hours a day, 7 days a week
