HKM-5924819 Glass Electric Cooking Kettle with Temperature Control - Modern Samovar Design for Smart Kitchens

HKM-5924819 · Electric Kettles · Glass Cooking Kettle, 3 kg

A Glass Kettle With a Dial in the Lid

HKM-5924819 is a single glass vessel with a stainless collar, a temperature dial built into the lid, and a control strip along the front of the base. The tapered body is wide at the base and narrow at the neck, a shape borrowed from the samovar rather than from a jug kettle.

Glass here is functional: you can see the water come up to temperature and see the leaf, if you brew in the vessel. A steel body hides both until you pour.

Two finishes, grey and black. The glass and stainless parts are the same in both.

At a Glance

• Type — glass electric kettle
• Body — borosilicate-type glass, stainless collar
• Control — lid dial, base touch strip
• Functions — temperature setting, timer, presets, keep warm
• Base — flat square base with front control strip
• Colours — grey · black

Materials and Construction

The vessel is glass with a stainless collar at the neck. The collar takes the lid thread and the handle mounting, which is why the glass itself carries no load at the joint — a common failure point on all-glass kettles.

The base is a flat slab with the controls on the front edge rather than on top. That layout keeps the panel visible while the kettle sits on it, and keeps the panel out of the steam path.

• Glass body, stainless collar, no load on the glass joint
• Lid dial for temperature, separate from the base panel
• Base controls on the front edge, angled toward the user

Why the Shape Matters

A wide base with a narrow neck heats unevenly unless the element covers the full floor; here the element does, which is why the taper does not create a cold zone at the bottom. The taper also gives a stable footprint — the centre of gravity sits low, so a knock is less likely to tip it.

The trade is height. This vessel is taller than a jug kettle of the same capacity, so check the clearance under a wall cabinet before it goes on the counter.

Presets are the part that makes a glass kettle practical for more than tea: the strip holds them, and the keep-warm function holds the temperature once a preset is reached, so the kettle can be set and left rather than watched.

How It Works

The listing describes it as a cooking kettle, and the controls support that: temperature setting and a timer mean it can hold water at a low simmer rather than only reaching a boil. That suits brewing, poaching, and any preparation that wants water below 100 °C.

It is still a kettle. It is not a hob pan, and it should not be used for anything that needs oil or direct high heat.

A single glass vessel with a lid dial and a base strip takes less depth than a two-vessel station, which is the reason to choose it: it sits where a kettle sits, and the controls are split between the lid and the base rather than gathered into one panel. The strip is a touch surface, so it wipes across in one movement instead of collecting water at the edges of keys.

Placement and Use

The flat base needs a level surface and about 10 cm of clearance above the lid for the dial and for lifting. Keep the front control strip within reach without reaching over the steam.

• Check cabinet clearance before positioning — the body is tall
• Dry base contacts before seating
• Keep the touch strip dry; wet fingers misread capacitive panels

Included and Optional

Grey and black are the two finishes, and in both the glass is left clear and the collar is left bright. The coloured moulding runs around the base and up the handle, so the object reads as a glass vessel set in a coloured frame rather than as a coloured kettle with a window.

Colours and Finishes

Grey and black differ only in the coated lower body and handle. With glass this transparent, the surrounding counter colour shows through, so the finish reads lighter than a solid steel kettle in the same tone.

Both finishes keep the stainless collar polished, which is the only bright element on the body.

Glass shows mineral film sooner than steel, and it shows it as a haze rather than as flakes, so the descaling rhythm is set by how the wall looks rather than by how the kettle performs. Vinegar and water, stood and rinsed, clears it; a soft brush reaches the shoulder, and the stainless collar is wiped rather than scoured.

The collar is what makes the glass hold its shape at the top: without it the rim would be a thin edge, and a thin edge is where a glass kettle chips first.

Care and Maintenance

Descale monthly in hard-water areas — a white film on the glass floor is calcium and it insulates the element. Hand wash; dishwasher cycles cloud the glass and dull the stainless collar.

Never put cold water into a hot empty vessel. Thermal shock is the one failure mode this material does not forgive.

Specifications

Frequently Asked Questions

Shipping, Returns and Warranty

Every HKM-5924819 is backed by coverage designed to protect your investment.

HKM-5924819 · glass electric kettle · lid dial and base strip · grey or black