HKM-6547411 Vacuum Insulated Stainless Steel Tea and Coffee Pot - 2L Capacity, Available in Black, White, Silver

HKM-6547411 · Electric Kettles · 2.0 L, Vacuum, Black White or Metal

Belly Pot, Gold Collar, Three Finishes

HKM-6547411 is a 2.0 L vacuum pot shaped like a bell: wide at the belly, drawn in at the shoulder, with a broad loop handle moulded to the body and a gold-tone collar around the lid. The lid carries a press lever beside the spout, the base is flat and slightly recessed, and a long-handled brush with a spiked head comes in the box.

It suits a sideboard or a meeting table where the pot is filled once and poured many times: two litres is ten small cups, the lever pours without unscrewing anything, and the vacuum wall keeps the outside dry. The three finishes — black, white and bare metal — cover both the painted and the unpainted version of the same shape.

At a Glance

• Type — vacuum pot with a press-lever lid, non-electric
• Capacity — 2.0 L (68 fl oz), as printed on the box
• Body — double wall, vacuum sealed, steel shell
• Lid — press lever beside the spout, gold-tone collar
• Handle — broad loop moulded to the body
• Included — long-handled spiked brush for the liner

Materials and Construction

The shell is steel with a second wall inside it and the air drawn out of the gap, which is what lets a full pot of boiling water be carried by the handle without a cloth. The shape is a bell: a wide belly for volume, a shoulder that turns in sharply, and a short neck that the lid seats into. The base is flat with a turned-in rim, so the pot stands without a ring.

The lid is a squat disc with a gold-tone band around its edge and a lever set into the rim beside the spout. The handle is a wide loop in the same finish as the body, anchored at the shoulder and at the belly, with a flat outer face wide enough for a hand. A spiked brush sits in the box, sized to reach the floor of the liner.

• The lever is the pour control: press to open the valve in the lid, release to close it.
• The spout is a short lip moulded into the neck, angled forward so the stream clears the belly.
• The collar is the only bright element on the black and white versions; on the metal version the whole shell is bright.

How It Works

Fill with the lid off, seat the lid, and press the lever to pour. Because the valve is in the lid rather than in the spout, the pot can be tipped and set down without a drip, and the contents are only exposed for the length of the pour. That is the difference between this and a jug with a hinged flap: there is no flap to hold open against a spring.

The vacuum wall does the rest. No hour figure is published for this model, so none is claimed; the construction is the same double-wall arrangement used across the range, and the practical effect is that the outside stays at room temperature and does not sweat, whether the pot holds coffee at breakfast or iced tea at lunch.

The box prints 2.0 L and 68 fl oz, and the colour swatches on its side show a wider palette than the three finishes sold here. The brush in the box is the maintenance item: a spiked head on a long handle, made to break the film that coffee leaves on the floor of a narrow liner.

Placement and Use

It lives on a table or a sideboard and wants room at the spout side, since the lever is worked by the same hand that holds the handle. The belly is wider than the base, so the pot needs a little more space than its footprint suggests when it is set down among cups.

• Fill below the neck so the lid seats on the rim rather than on liquid.
• Press the lever fully; a part-press splits the stream at the lip.
• Set it down on a dry surface — the shell does not sweat, but a wet base marks wood.

Included and Optional

Colours and Finishes

Three finishes are sold at the same price: black, white and metal. The black and white are painted shells with the gold-tone collar and lever as the only contrast; the metal version leaves the steel bare, so the collar and the body read as one bright surface.

The box side prints further swatches — red, navy, a floral print, teal and gold — as a range palette rather than options on this listing. No coating is named for the painted versions, so the treatment is recorded as unstated.

Care and Maintenance

Rinse the liner with warm water after use and use the brush in the box for the floor, where coffee oils settle. A soak in warm water with a little bicarbonate lifts tannin; strong chlorine and aggressive descalers are not for stainless. Leave the lid off to dry so the valve and seal are not kept wet.

The shell wipes with a damp cloth and should not be immersed, since the vacuum seam at the base is sealed rather than welded shut. Neither pot nor lid is dishwasher safe. The gold-tone collar is plated, so it takes a soft cloth rather than a polish.

Specifications

Frequently Asked Questions

Shipping, Returns and Warranty

Every HKM-6547411 is backed by coverage designed to protect your investment.

HKM-6547411 · 2.0 L vacuum pot · press lever and gold collar · brush included · three finishes