HKM-7038931 Glass Teapot and Kettle Set 110 V Lid Thermometer Infuser Column Two Readouts Grey or Black Finish

HKM-7038931 · electric kettles · see the specifications below (metric and US units listed) · 12.1 lb (5.5 kg), packed

A Dial in the Lid Reads the Water Not the Base Setting ValueGlass Teapot Set 110 V Thermometer

HKM-7038931 is a two-part tea set: a glass teapot with a central infuser column, and a second vessel for heating water, both on one base with separate readouts. The glass is the reason to buy it — leaf opens in view, and the colour tells you when to lift the column.

A thermometer sits in the lid, so the water temperature is readable without a separate probe. The base carries two displays and three controls: power, heating and keep warm.

Two finishes are listed, grey and black. The set runs on 110 V. The teapot is glass from rim to base, with a stainless column through the centre that holds the leaf.

At a Glance

• Type — glass teapot and kettle set
• Voltage — 110 V
• Teapot — glass body, central infuser column, lid thermometer
• Second vessel — stainless upper, glass lower
• Base — two heated positions, two readouts
• Controls — power, heating, keep warm
• Type — Glass teapot and kettle set
• Voltage — 110 V
• Teapot — Glass, stainless infuser column, lid thermometer
• Second vessel — Stainless upper, glass lower
• Base — Two heated positions, two readouts
• Weight — 12.1 lb (5.5 kg), packed

Body, Material and Fit

Because the column is metal and perforated along its length, water circulates through it rather than around a bag sitting on the floor of the pot.

The second vessel mixes materials: a stainless collar and lid above a glass body, so the water level is visible while it heats.

Both vessels sit on one base, each with its own readout. Heat water in the second vessel, pour it over the leaf in the teapot, and watch the infusion.

• Type: Glass teapot and kettle set
• Voltage: 110 V
• Teapot: Glass, stainless infuser column, lid thermometer
• Second vessel: Stainless upper, glass lower
• Base: Two heated positions, two readouts
• Weight: 12.1 lb (5.5 kg), packed

When the color reaches the point you want, lift the column out and the brew stops. Both vessels can be heated at once, which is the practical advantage of the shared base: the next round is already hot while the first is being drunk.

Heating, Capacity and Control

The lid thermometer reads the water in the teapot, not the base setting, which is the number that actually matters once the water has been poured.

Keep-warm holds the base at temperature between rounds. Green and white teas are brewed well below boiling; black and pu-erh want water closer to a full boil.

Pouring at the right temperature is easier to control than correcting a brew that has already gone bitter.

The set occupies the footprint of a small tray: two vessels side by side on one base, each with its own readout, and a gap between them wide enough to lift either off without touching the other.

Who It Fits and How It Pours

The thermometer sits in the teapot lid and reads the water inside the pot rather than the figure the base was set to.

That distinction matters after the pour: water leaves the heating vessel at its set temperature and arrives in the glass a little lower, so the dial reports what the leaf actually meets rather than what was asked for.

• Two places to look, one for the brew and one for the water
• The two readouts are set independently
• That gap is why the base is longer than a single kettle's plate
• Water level and the movement of a boil are therefore visible through the lower wall

What's in the Box

HKM-7038931 ships in one carton with the the product and the parts listed above. Check each item against the list before the first use, and keep the carton for the first month in case something has to go back.

Color and Finish

Rinse the infuser column after every use; leaf caught in the perforations dries hard and blocks flow. Empty both vessels and leave the lids off to dry, so no ring forms inside the glass.

Descale the heating vessel monthly in hard-water areas.

Care and Maintenance

White scale on the stainless floor slows every boil and eventually triggers early cut-out. The base is wide because it carries two vessels.

It needs a level, dry surface with clearance above the taller vessel, and enough depth that neither body overhangs the front edge.

Hand wash the glass. A dishwasher cycle clouds it over time and dulls the stainless column. Two colorways are sold, grey and black, and both leave the glass clear and the stainless collar bright.

The colored parts are the mouldings — handles, lids, base frame — rather than the vessels, so the set looks the same from the table whichever one is chosen; the difference is in the furniture around the glass.

Specifications

Frequently Asked Questions

Service and Policies

Coverage that lasts beyond the box. Orders ship free with a tracking number in 2 to 5 business days. From delivery, the product is protected for 180 days against manufacturing defects and transit damage, returnable within 30 days for a full refund, and covered by a 24-month parts-and-labor warranty on manufacturing defects. Four policies, one idea: ship it free, protect it for 180 days, take it back for 30, and stand behind it for two years.

HKM-7038931 · Electric Kettles · Glass teapot and kettle set · 110 V · Glass, stainless infuser column, lid thermometer · Stainless upper, glass lower · Two heated positions, two readouts · Grey · Black · 12.1 lb (5.5 kg), packed