Phone Accessories>>
HKM-7332307 360 Degree Adjustable Car Cup Holder Phone Mount for Phones and Tablets with Padded Grip and ABS Body in Black
HKM-7332307
360 Degree Turn, Padded Grip
The HKM-7332307 is a car phone mount that sits in a cup holder rather than on a vent or a screen. A split base opens to grip the holder well from about 2.8 to 3.5 inches wide, and a jointed arm above it sets the height. The cradle turns a full circle, so the phone can face the driver or the passenger, and the jaws that hold the handset are lined with foam. The body is molded in black ABS, and the base releases from the well in one movement.
Key Features
Six details that shape how the HKM-7332307 is built and how it holds.
A Base That Grips the Well
The mount stands in a cup holder rather than clipping to a vent or sticking to a screen. A split base opens as it is turned, so it grips the sides of the well from about 2.8 to 3.5 inches across and stays put as the car moves.
A Full Circle of Rotation
The cradle turns through a full circle on its joint, so the phone can be set to face the driver for navigation or turned toward a passenger. The angle is set by hand and holds where it is put, so the screen can be changed at a stop.
An Arm That Sets the Height
The arm between the base and the cradle is jointed, so the phone can be raised or lowered within the well. That keeps the screen at a height that can be glanced at without looking down into the console.
Foam Where It Touches
The jaws and the back of the cradle carry a foam layer, so the phone sits on padding rather than on bare plastic. The foam takes the small movement of a car on rough road, which keeps the case and the screen free of scuffs.
ABS With a Buckle Fit
The body is molded from ABS plastic, and the sections join on a buckle rather than on screws. That means the mount comes apart into two pieces for a bag and goes back together without a tool.
Phones and Tablets
The cradle opens wide enough to take a tablet as well as a phone, which is what makes the mount useful on a long drive with a passenger. The same grip holds a slim phone and a larger handset without a second cradle.
Overview
A cup holder base, a jointed arm and a lined cradle.
The HKM-7332307 is a car phone mount that stands in a cup holder rather than clipping to a vent or sticking to a screen. A split base opens as it is turned and grips the well from about 2.8 to 3.5 inches across, and a jointed arm above the base sets the height of the cradle. The cradle turns through a full circle, so the screen can face the driver or a passenger, and the jaws and the back of the cradle are lined with foam. The body is molded from black ABS, and the sections join on a buckle rather than on screws, so the mount comes apart for a bag without a tool. The same cradle takes a phone or a tablet.
Stands in the Cup Holder
A base that grips the well and a cradle that turns a full circle.
The split base opens as it is turned and grips the sides of the cup holder well, so nothing is clipped to a vent or stuck to a screen. The cradle above turns through a full circle on a jointed arm and holds the phone on a foam-lined grip.
Full Specifications
What the base, the arm and the cradle are made of.
Base, Arm And Cradle
How the split base, the jointed arm and the cradle work together.
The HKM-7332307 is a fully mechanical mount with no suction cup, no adhesive and nothing to charge. The split base goes into a cup holder and opens as it is turned, so it presses against the sides of the well and grips from about 2.8 to 3.5 inches across. A jointed arm rises from the base and sets the height of the cradle, and the cradle itself turns through a full circle so the screen can be turned toward the driver or a passenger. The jaws and the back of the cradle are lined with foam, which takes the movement of the car on rough road.
What’s in the Box
Everything needed to set the mount in the car.
1 x Cup Holder Mount
The split base with the jointed arm above it
1 x Phone Cradle
The foam-lined cradle that holds the device
1 x Base Insert
The sleeve that widens the grip in a large well
1 x Fitting Guide
Base, arm height and angle guidance
1 x Cleaning Cloth
The cloth for the cradle and the base
1 x Warranty Card
Coverage details for the HKM-7332307
Why Choose the HKM-7332307
Six further reasons drivers keep the HKM-7332307 in the car.
Nothing on the Windscreen
Because the mount stands in a cup holder, nothing is stuck to the glass or clipped over a vent. The windscreen stays clear, and no adhesive pad is left behind when the mount is taken out.
Fits Most Wells
The split base opens across a range of about 2.8 to 3.5 inches, which covers the cup holders in most cars. That range is what lets one mount move from car to car instead of being tied to a single console.
Reaches a Glanceable Height
The jointed arm lifts the cradle out of the well, so the screen sits where it can be read with a glance rather than a look down. That is what keeps a phone mount useful for navigation instead of a distraction.
Takes a Tablet as Well
The cradle opens wide enough for a tablet, so a long drive with a passenger can use the same mount for a larger screen. The foam lining holds a tablet as gently as it holds a phone.
Comes Apart for Storage
The sections join on a buckle rather than on screws, so the mount breaks into two pieces for a glovebox. It goes back together by hand, which makes it practical to move between cars.
Holds on Rough Road
The base presses on both sides of the well rather than resting on the bottom, and the foam in the cradle absorbs the small movements of the car. Together they keep the phone steady over a broken surface.
Frequently Asked Questions
Quick answers about the HKM-7332307 car phone mount.
Will it fit my cup holder?
The split base opens to grip a well from about 2.8 to 3.5 inches across, which covers the cup holders in most cars. Set the base in the well and turn it until it presses on both sides, then check that it does not rock. A very shallow well or a deep one with a narrow lip may not give the base enough to press against, so measure the well before ordering if the console is unusual.
Can I use it with a tablet?
The cradle opens wide enough to take a tablet as well as a phone, so a larger screen can ride in the same mount. Check the weight of the tablet before a long drive, because a heavy device puts more load on the jointed arm than a phone does. With a tablet in place, keep the arm low and the base set firmly, so the weight sits over the well rather than out in front of it.
How do I set the angle?
The cradle turns through a full circle on its joint, so the screen can face the driver, a passenger or anywhere between. Set the base first, then the arm height, then turn the cradle with the phone already in the jaws, because the weight of the device changes how the joint settles. Check the angle at a stop rather than while driving, and leave the mount where it sits once the screen reads the way you want.
Does it mark the phone?
The jaws and the back of the cradle carry a foam layer, so the handset rests on padding rather than on bare plastic. That keeps a case and a screen free of scuffs, and it also takes the small movement of a car over rough road. Wipe the foam with the cloth in the box if it picks up dust, because grit trapped in the padding is the one thing that can leave a mark.
How do I take it out?
Turn the base back the way it was set and the split grip closes, so the mount lifts straight out of the well. The sections then come apart on the buckle without a tool, which is what makes the mount easy to move between cars or to put away in a glovebox. Take the phone out of the cradle first, so the arm is not carrying weight while the base is being turned.
Is it steady on rough road?
The base presses on the sides of the well rather than sitting on the bottom, which is what keeps the mount from walking as the car moves. The foam in the cradle absorbs the small movements that a broken road sends through the console. Keep the arm set low, because a cradle held high on a long arm will sway more than one sitting close to the base.
Quick Troubleshooting
Common HKM-7332307 points and what to check first.
The base will not grip
Check that the well is between about 2.8 and 3.5 inches across, because a base that cannot reach both sides will not hold. Turn the base slowly and stop when it presses rather than forcing it further, since an over-tightened base can crack. If the well has a liner or a rubber mat in it, take the mat out before setting the base, because a soft lining stops the grip from pressing on anything solid. A soft lining stops the grip from pressing on anything solid. A soft lining stops the grip from pressing on anything solid.
The phone slides in the cradle
Check that the jaws sit on the sides of the phone rather than over the screen, and close them until both sides touch the case. A phone that still moves is usually sitting on the foam at an angle, so take it out and set it level. Wipe the foam with a cloth if it has picked up dust, since grit under the padding is what lets a phone creep. Grit under the padding is what lets a phone creep. Grit under the padding is what lets a phone creep.
The cradle sags over time
A cradle that sags is carrying more weight than the joint holds, so lower the arm and turn the cradle back toward the base. Check that the base is still pressing on both sides of the well, because a base that has worked loose lets the whole arm lean. Take the device out when the car is parked for a long period, so the joint is not holding weight for hours. Take the device out when the car is parked for hours. Take the device out when the car is parked for hours.
The mount rattles
A rattle usually comes from the base rather than the cradle, so turn the base a fraction tighter until the noise stops. Check too that the phone is not touching the console or the trim, because a device resting on a hard surface will buzz on rough road. Take the mount out and set it back in once the well is clean, since grit under the base stops it sitting true. A device resting on trim will buzz on rough road. A device resting on trim will buzz on rough road.
The arm will not hold its height
Check that each joint is set with the phone already in the jaws, because the weight of the device decides where the joint settles. Set the height you want and press the joint until it holds, then check that the cradle does not creep when the car moves. If the joint still slips, lower the arm and let the base take more of the load. Set each joint with the phone already in the jaws. Set each joint with the phone already in the jaws.
It blocks the gear lever
A mount that reaches into the path of the lever or the handbrake is set too high or too far forward. Lower the arm and turn the cradle so the phone sits over the well rather than out in front of it. Check the room with the car stationary and the lever moved through its full travel before you set off, because a mount that fouls the lever is a risk rather than a convenience. A mount that fouls the lever is a risk, not a convenience. A mount that fouls the lever is a risk, not a convenience.
Service & Policies
Coverage that keeps working long after the box arrives.
Free Shipping on All Orders
Every order ships free. Handling time: 0-1 business days (Monday to Friday). Transit time: 2-5 business days (Monday to Friday). A tracking number is emailed as soon as the parcel leaves our warehouse.
180 Days Purchase Protection
Your purchase is protected for 180 days from the delivery date against manufacturing defects and damage in transit. If something arrives wrong, we make it right.
30 Days Money Back Guarantee
Not completely satisfied? Request a return within 30 days of delivery for a full refund. We keep the process simple and hassle-free.
24 Months Warranty Service
The product is covered by a 24-month warranty from the delivery date against manufacturing defects. Coverage includes parts and labor; normal-wear items are excluded.
Important Safety Notes
Read these notes before the first drive with the HKM-7332307.
The HKM-7332307 is a car phone mount, so set it up with the car parked and the engine off, and check that the base presses firmly on both sides of the cup holder well before you drive. Keep the cradle clear of the gear lever, the handbrake and the pedals, and set the angle at a stop rather than while the car is moving. Take the phone out of the cradle before you turn the base or lift the mount out, so the arm is never carrying weight while it is being moved. Keep the mount away from the airbag zones and never set it where an airbag would send it forward. Check the base once in a while, since a mount that has worked loose can move as the car stops.
HKM-7332307 - car phone mount in black ABS, with a split base that grips a cup holder well from about 2.8 to 3.5 inches across, a jointed height-adjustable arm, a cradle that turns through a full circle, and foam lining on the jaws and the back of the cradle. Takes phones and tablets, and joins on a buckle without tools. Read the manual before first use. Nothing here is safety certification advice.
Every product we offer includes a 180-day purchase protection plan at no additional cost. This coverage extends beyond a standard warranty, reflecting our confidence in product quality and our ongoing commitment to your satisfaction.
The protection plan is designed to provide practical help in real-world situations. Whether you encounter a manufacturing issue, a performance problem, or an unexpected accident, our team is ready to assist with clear, fair solutions.
What Is Covered
Manufacturing Defects
We replace items with material or workmanship flaws at no charge.
Performance Failures
Free repair or replacement if the product fails under normal use.
Accidental Damage
One-time courtesy replacement at a reduced price.
Zero Hidden Fees
All shipping costs for replacements and returns are covered.
How to File a Claim
How This Differs from the Warranty
The 180-day purchase protection includes accidental damage and performance failures that are typically not covered by a standard warranty. It provides an additional layer of support during the first six months after purchase, giving you greater confidence and peace of mind.
We want you to be completely satisfied with your purchase. If for any reason you are not fully happy, you may return your item within 30 days of delivery for a full refund. No lengthy forms, no unnecessary questions.
Our return policy is built on a simple principle: if the product is not right for you, we will make it right. We understand that online shopping involves trust, and we work hard to earn that trust with every order.
Return Eligibility
30-Day Window
Request a return within 30 days of delivery.
Original Condition
Unworn or unused, with tags and original packaging.
Proof of Purchase
A receipt or order number is required.
Fast Refund
Refund processed within 10 business days.
How to Start a Return
Returns & Exchanges Overview
Damages & Exchanges
Please inspect your order as soon as it arrives. If the item is defective, damaged, or incorrect, contact us immediately so we can evaluate the issue and make it right. For exchanges, the fastest option is to return the original item and place a new order for the replacement.
We believe in the quality of our products, and we want you to share that confidence. Every product is backed by a 24-month warranty covering all structural and functional components, including zippers, buckles, straps, and fabric integrity.
The warranty is designed to be simple and accessible. You only need your proof of purchase to begin a claim, and our team will assess the issue promptly. If a manufacturing issue arises, we will make it right.
What the Warranty Covers
Comprehensive Coverage
Every part warranted for two full years.
Free Repair or Replacement
Whichever is faster, at no cost to you.
Quick Turnaround
Claims assessed within 1 business day.
Transferable
Warranty follows the product, not the owner.
How to File a Warranty Claim
Every order ships free—no minimums, no hidden fees. We currently deliver across the United States and are actively working to expand to more countries. We partner with reliable U.S. courier services to ensure your order arrives safely and on time.
Our delivery process is designed for transparency. From the moment you place your order to the moment it reaches your door, you receive clear updates at every stage. We carefully inspect each product before dispatch, and we provide tracking information as soon as your order ships.
Our U.S. Shipping Partners
USPS
Official national carrier with nationwide coverage.
UPS
Fast and reliable ground and express shipping.
FedEx
Express delivery with real-time tracking.
DHL eCommerce
Efficient parcel delivery for e-commerce shipments.
Delivery Process
Delivery Time Summary
Cancellations & Taxes
You may cancel your order at any time before it ships. All product prices include applicable taxes, and there are no additional VAT or customs fees for orders delivered within the United States.
Whether you have a question, need help with an order, or just want some advice, our support team is available around the clock. We don't just respond to messages—we work with you to find real solutions that fit your needs.
Our support specialists are trained to handle a wide range of requests, from product recommendations to technical troubleshooting. No matter the question, you can expect a professional and friendly response.
How We Can Help
Product Guidance
Our experts help you choose the right product.
Order Assistance
Modify orders, track shipments, or speed up delivery.
Warranty & Returns
Start claims or returns quickly and easily.
Technical Troubleshooting
Step-by-step solutions for product issues.
Contact Information
24/7 Phone
+1 (209) 280-3200
support@hekomart.com
Address
3401 Dale Rd, Modesto, CA 95356
Support Hours
Available 24 hours a day, 7 days a week
