HKM-6678483 800 ml Gooseneck Electric Kettle Temperature Control Six Keys Two Hour Keep Warm and Three Ready Beeps

HKM-6678483 · electric kettles · 0.8 L (27 fl oz) · net weight in the table

Temperature and Setting Shown Side by Side on the Base LED800 ml Gooseneck Kettle 6 Keys LED

HKM-6678483 is a 0.8 L gooseneck kettle in matte black, drawn as a cone that swells at the foot and closes at the collar, with a long spout that rises in a single curve and a handle set at an angle with polished steel caps at both ends.

The base is a black square with an LED indicator at the left and a cluster of keys at the right: boil, keep warm, on/off, plus, minus and cancel.

It suits a desk or a coffee corner where the pour is the point and the volume is small: 0.8 L fills two cups with a little left for rinsing, the gooseneck gives a narrow stream at a shallow angle, and the base holds a set temperature for up to two hours.

At a Glance

• Type — cordless gooseneck kettle on an induction base
• Capacity — 0.8 L
• Body — stainless steel, matte black, conical
• Display — LED indicator showing temp and set point
• Keys — boil, keep warm, on/off, plus, minus, cancel
• Keep warm — up to 2 hours, with a three-beep ready tone
• Capacity — 0.8 L
• Body — Stainless steel, matte black, conical
• Spout — Gooseneck, square-cut tip
• Base — Induction plate with LED and six keys
• Keep Warm — Up to 2 hours, three-beep ready tone
• Power — Not published, confirm before ordering

Body, Material and Fit

The body is stainless steel with a matte black finish, pressed as a cone with a soft shoulder and a flat collar.

The spout is a drawn tube welded low on the wall and bent through a long curve, cut square at the tip so the stream leaves vertically.

The lid is a flat disc with a small black knob on a stalk, seated inside the rim. The handle is a tapered moulding set at an upward angle from the shoulder, with a polished steel collar at the body end and a polished cap at the foot.

• Capacity: 0.8 L
• Body: Stainless steel, matte black, conical
• Spout: Gooseneck, square-cut tip
• Base: Induction plate with LED and six keys
• Keep Warm: Up to 2 hours, three-beep ready tone
• Power: Not published, confirm before ordering

The base is a square plate in the same matte black with a raised induction ring in the centre, an LED window at the left corner and a six-key cluster at the right.

Heating, Capacity and Control

The base is described in the supplier's graphic as an induction system, and the body is cordless on it: lift to pour, set back to reheat.

The keep-warm function is the one that changes how the kettle is used in practice — a pour-over can be brewed, refilled and brewed again without reheating from cold, and the temperature stays where it was set.

No wattage is published in the listing, so none is given. The features the supplier's own artwork names are BPA-free materials, a leak-proof lid, an anti-scalding body and a light weight; those are quoted as stated rather than tested here.

Fill, seat the body on the base, and set a temperature with the plus and minus keys; the LED shows the current temperature above and the set point below.

Who It Fits and How It Pours

Boil, plus, minus and the keep-warm controls sit in a cluster at the right of a square plate, with the LED at the left.

Nothing is on the body, which makes this the opposite arrangement to the kettles in the range that print the panel on the shell: here the setting stays on the counter, and the kettle that comes off the plate carries no interface at all.

• A ready tone sounds three times when the water reaches the preset
• Keep-warm is rated at up to two hours
• The tone is the useful part for anyone working at the same bench as the kettle rather
• The supplier's graphic calls the base an induction system and the body cordless

What's in the Box

HKM-6678483 ships in one carton with the the product and the parts listed above. Check each item against the list before the first use, and keep the carton for the first month in case something has to go back.

Color and Finish

Descale with white vinegar and water when a film appears: equal parts, stood twenty minutes, then a fresh boil and two rinses. The interior takes a soft brush, and the spout should be rinsed through rather than scrubbed, since the tube is narrow.

Wipe the matte body with a damp cloth and dry it; the finish marks with water spots if left wet.

Care and Maintenance

The base panel wants a dry cloth rather than a wet one, and neither body nor base should be immersed. The lid should be left off to dry so the seal and the rim do not stay damp.

The base is a square plate rather than a disc, so it needs a little more counter depth than a round one; set it with the key cluster facing the hand that works it and the spout turned toward the dripper.

Leave room at the front for the cup and at the side for the lid when it is lifted off. The base LED prints the current temperature and the chosen one next to each other, in Fahrenheit in the gallery photograph.

That pairing is what a temperature-controlled kettle is for: with both figures visible the gap between them is a countdown rather than a guess, and the pour can be timed off the number instead of off the clock.

Specifications

Frequently Asked Questions

Service and Policies

Coverage that lasts beyond the box. Orders ship free with a tracking number in 2 to 5 business days. From delivery, the product is protected for 180 days against manufacturing defects and transit damage, returnable within 30 days for a full refund, and covered by a 24-month parts-and-labor warranty on manufacturing defects. Four policies, one idea: ship it free, protect it for 180 days, take it back for 30, and stand behind it for two years.

HKM-6678483 · Electric Kettles · 0.8 L · Stainless steel, matte black, conical · Gooseneck, square-cut tip · Induction plate with LED and six keys · Up to 2 hours, three-beep ready tone · Matte black with polished steel caps · Not published, confirm before ordering