HKM-6907859 Modern Stainless Steel Electric Kettle - 1.8L Capacity, 1500W Power for Quick Water Boiling

HKM-6907859 · Electric Kettles · 1.8 L, 1500 W, Steel, Grey or Pink

Dial Gauge, 304 Liner, Lift-Off Lid

HKM-6907859 is a 1.8 L kettle rated at 1500 W with an 304 stainless liner, a lift-off lid, and an analogue dial gauge set low on the front of the body, printed from 0 to 100 with cool and hot named at either end and a red band across the brewing range. The shell is a soft pear shape that swells below the shoulder, sold in a steel finish, in grey or in pink.

It suits a kitchen where the water is judged by eye — the dial is read before pouring rather than a preset being chosen — and a table where the kettle is carried rather than left on the counter: the lid lifts off for filling at the tap, and the handle is set low enough to keep a full body balanced.

At a Glance

• Type — cordless kettle with an analogue dial gauge
• Capacity — 1.8 L, as stated in the listing
• Power — 1500 W
• Liner — 304 stainless steel, stamped inside the wall
• Gauge — dial reading 0–100, cool to hot, red brewing band
• Finishes — steel, grey or pink

Materials and Construction

The body is steel with a 304 stainless liner, and the grade is stamped into the inner wall beside the maximum and minimum marks — visible in the top-down photograph, together with a small filter screen set into the spout. The exterior is finished in a satin coat, smooth rather than brushed, in the steel, grey and pink versions alike.

The silhouette is a pear: narrow at the collar, widest at the lower third, turned in again at the foot onto a black base ring. The lid is a flat disc with a black knob on a short stem, and it lifts off entirely rather than hinging, which leaves a wide mouth for filling and cleaning. The handle is a closed loop with a dark grip along its inner face and a gentle flare at the top.

• The gauge is a mechanical dial behind a glass window: a red needle, a printed scale and the words cool and hot at the ends.
• A rocker switch sits under the handle at the top of the base ring, where the thumb finds it.
• The spout is a short lip with a perforated screen behind it, so leaf and scale stay in the body.

How It Works

Fill through the open mouth, seat the lid, set the body on its base and press the rocker switch. The element is rated 1500 W against a 1.8 L capacity; no boil time is published, so none is given. The dial reads the water temperature as it climbs, with the red band marking the range where tea and coffee are usually brewed, and the needle falls back as the water cools.

There is no digital control and no preset: the switch is the only input and the gauge is the only output. The listing describes quick boiling and does not publish a time or an automatic cut-off, so neither is claimed here. What the gauge gives is the ability to catch the water before it boils — for green tea, or for a pour-over that wants water just off the boil.

The lift-off lid is the other working part. Because it comes away completely, the body can be filled from a tap without the lid swinging back, and the inner wall — including the stamped grade and the fill marks — is reachable with a brush.

Placement and Use

The kettle wants a level counter within reach of an outlet, with the gauge facing the person pouring and the switch under the thumb. Leave clearance at the spout for a cup and room above the collar for lifting the lid off; the pear shape is wider than a straight cylinder at the base, so check the footprint on a narrow shelf.

• Fill between the minimum and maximum marks stamped inside the wall.
• Watch the dial rather than the clock; the gauge is the control on this kettle.
• Dry the base ring and the coupling after filling, so water does not run into the contacts.

Included and Optional

Colours and Finishes

Three finishes are sold at the same price: steel, grey and pink, each photographed on a plain ground so the tone is established rather than implied. All three carry the same black lid knob, black base ring and dark handle grip, and the gauge window is the same in every version.

The steel finish is a light satin grey rather than a mirror polish, the grey is a mid tone with a slight blue cast, and the pink is a soft, warm shade rather than a bright one. The packaging choice is separate from the colour and does not change the kettle.

Care and Maintenance

Descale every four to six weeks where the water is hard: equal parts white vinegar and water, stood twenty minutes, then a fresh boil and two rinses. The liner is stainless and takes a soft brush; the perforated screen behind the spout needs a rinse to keep it clear.

Wipe the shell with a damp cloth and dry it, since the satin finishes mark with water spots. The gauge window is glass over a printed face, so it wants a soft cloth rather than a scouring pad. Neither body nor base should be immersed, and the lid should be left off to dry after washing.

Specifications

Frequently Asked Questions

Shipping, Returns and Warranty

Every HKM-6907859 is backed by coverage designed to protect your investment.

HKM-6907859 · 1.8 L 1500 W kettle · 304 liner · analogue dial gauge · steel, grey or pink