HKM-7464915 1.8 L Double Wall Stainless Steel Electric Kettle Cool Touch Retro Silhouette Grey Navy or Green Finish

HKM-7464915 · electric kettles · 1.8 L (60.9 fl oz) (61 fl oz) · net weight in the table

Broad Shoulders Tapering to a Foot Narrower Than the Body1.8 L Double Wall Kettle Retro Shape

HKM-7464915 is a 1.8 L kettle built as two steel walls with air between them: the water sits inside the inner vessel while the outer shell stays cool enough to hold bare-handed, even at a full boil. Temperature is set on the kettle rather than left to the thermostat alone, and the element cuts out on its own when the water is ready or the vessel runs dry.

It suits a shared counter — a family kitchen or a hotel pantry — where the kettle gets touched mid-cycle by someone checking whether it is done.

The double wall answers that directly: the outer surface reads the room, not the water. The 1.8 L fill covers six to eight cups without a second boil, and the lid carries a faceted knob that lifts clear at the collar.

At a Glance

• Type — double wall electric kettle with temperature control
• Capacity — 1.8 L (60.9 fl oz)
• Body — double wall stainless steel, cool touch outer shell
• Control — selectable temperature settings, stated by the listing
• Safety — automatic shut-off at boil and on boil-dry
• Lid — steel collar with a faceted clear knob
• Capacity — 1.8 L (60.9 fl oz)
• Power — Not published, confirm before ordering
• Body — Double wall stainless steel, cool touch outer shell
• Control — Selectable temperature settings (values not published)
• Safety — Auto shut-off at boil; boil-dry cut-out
• Base — Corded plate with centre coupling

Body, Material and Fit

The shell is drawn stainless steel in a retro silhouette — broad shoulders tapering to a narrow foot — with a bright steel band at the collar and a second bright ring low on the body.

Between that outer shell and the water vessel sits the double wall gap: the listing credits it with holding heat in and keeping the outer surface cool to the touch, which is the point of the construction rather than a styling accident.

The handle is a moulded loop anchored at the collar and the rear shoulder, standing clear of the shell so a knuckle never rides the hot surface.

• Capacity: 1.8 L (60.9 fl oz)
• Power: Not published, confirm before ordering
• Body: Double wall stainless steel, cool touch outer shell
• Control: Selectable temperature settings (values not published)
• Safety: Auto shut-off at boil; boil-dry cut-out
• Base: Corded plate with centre coupling

The spout is a low angled cut at the front of the collar, positioned below the lid line so the pour starts without tipping far. The lid is a steel disc with a faceted clear knob and a sealing rim; whether it lifts off whole or is captive is not established by the images.

Heating, Capacity and Control

Water goes in through the collar, the kettle seats on its plate, and the rocker switches the element on.

Temperature control is the stated method: a target is selected and the kettle heats to it rather than past it, which is what keeps green tea from scalding and keeps a second pour at drinking heat.

The listing does not publish the selectable temperatures or their number, so no preset list is given here.

The shut-off is two-stage by the listing's description: it triggers when the water reaches boiling point, and it also triggers on a dry vessel — the boil-dry cut that stops the element running with nothing in it.

Who It Fits and How It Pours

The cut-out works on two conditions rather than one: the element stops when the water reaches a boil, and it also stops if the vessel runs dry.

The second is the one that matters on a morning when the kettle is switched on before the tap is opened - it is a backstop, not a licence to run the element unattended.

• The base is a low plate with a coupling at the centre
• Both are automatic; neither needs watching
• Wattage is not published — no power figure appears in the title
• A 1.8 L fill takes longer than a 1 L one at any given wattage

What's in the Box

HKM-7464915 ships in one carton with the the product and the parts listed above. Check each item against the list before the first use, and keep the carton for the first month in case something has to go back.

Color and Finish

Descale every four to six weeks where the water is hard: equal parts white vinegar and water, stood twenty minutes in the vessel, then a fresh boil and two rinses.

The double wall means the outer shell barely warms during use, so a damp cloth is all the exterior needs; the steel collar and the bright rings take a soft dry cloth to keep their finish.

Care and Maintenance

The faceted knob and the lid rim wipe clean with the same cloth. Neither the body nor the plate may be immersed — the element and the coupling are both sealed against splash, not against a sink.

Empty the vessel between uses where the water is hard; the scale that forms in standing water is the kind descaling was invented for.

Set the plate on a level counter within reach of an outlet, with headroom above the collar for lifting the lid and clearance behind the handle for a full rearward grip.

The shell is cool to the touch, so the kettle can sit near a work zone without a heat exclusion zone around it — but the plate still needs dry footing, and the spout should not face a shelf edge where a poured stream could reach.

Specifications

Frequently Asked Questions

Service and Policies

Coverage that lasts beyond the box. Orders ship free with a tracking number in 2 to 5 business days. From delivery, the product is protected for 180 days against manufacturing defects and transit damage, returnable within 30 days for a full refund, and covered by a 24-month parts-and-labor warranty on manufacturing defects. Four policies, one idea: ship it free, protect it for 180 days, take it back for 30, and stand behind it for two years.

HKM-7464915 · Electric Kettles · 1.8 L (60.9 fl oz) · Not published, confirm before ordering · Double wall stainless steel, cool touch outer shell · Selectable temperature settings (values not published) · Auto shut-off at boil; boil-dry cut-out · Corded plate with centre coupling · Grey, navy or green shown; one default configuration ships